08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
8:00 - 9:00 (1h)
Welcome
9:00 - 9:30 (30min)
Opening speech
A0002
9:30 - 10:20 (50min)
Keynote
A0002
Benoit Blaysat
› Chasing anticracks - How PTV and DIC revolutionized snow avalanche research
- Alec Van Herwijnen, WSL Institute for Snow and Avalanche Research SLF
09:30-10:20 (50min)
10:20 - 10:50 (30min)
Coffee break
Second floor
10:50 - 11:50 (1h)
Extrem
A0002
Marco Rossi
› X-ray digital image correlation for deformation measurements in extreme environments
- Elizabeth Jones, Sandia National Laboratories
10:50-11:20 (30min)
› Deformation of CANDU Pressure Tube under Biaxial Stress State at High Temperatures
- Chukwudi Azih, Canadian Nuclear Laboratories
11:10-11:30 (20min)
› A SHPB digital twin for the optimization of specimens dedicated to heterogeneous high strain rate tests
- Thomas Fourest, DMAS, ONERA, 59000, Lille, France
11:30-11:50 (20min)
11:50 - 12:30 (40min)
Vendors
A0002
12:30 - 13:50 (1h20)
Lunch
Last floor
13:50 - 15:30 (1h40)
Volume measurements
109
Clément Jailin
› Universal Tomographic Calibration: Achieving 1/100th Voxel Digital Volume Correlation (DVC) Displacement Precision
- Alex Arzoumanidis, Psylotech, Inc. - Brian Bay, Oregon State University; School of Mechanical, Industrial, and Manufacturing Engineering - André Phillion, McMaster University [Hamilton, Ontario]
13:50-14:10 (20min)
› Dual X-ray and Neutron tomography to observe hydro-mechanics in porous media
- Hilario Greggi, 3SR Lab
14:10-14:30 (20min)
› Optical Scanning Tomography to measure harmonic displacement fields and to identify visco-elastic parameters distributions
- Bertrand Wattrisse, Laboratoire de Mécanique et Génie Civil
14:30-14:50 (20min)
› Towards color X-ray tomography: Detection of small quartz grains via contrast-enhanced 3D images of carbonate rocks using a CdTe Photon Counting Detector
- Franck Decroos, Laboratoire Navier
14:50-15:10 (20min)
› Measuring residual stresses in 3D woven composite fan blades via DVC
- Yannick YASOTHAN, Laboratoire de Mécanique Paris-Saclay
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
Inverse and identification methods
110
Fabrice Pierron
› Boundary conditions and constitutive parameter identification
- Antoine Vintache, EikoSim, Laboratoire de Mécanique Paris-Saclay
13:50-14:10 (20min)
› Characterization of anisotropic hyperelastic behavior with a data-driven approach
- Annie Morch, Institut de Recherche en Génie Civil et Mécanique Nantes université
14:10-14:30 (20min)
› Image-based B-Spline beam models of architected materials using Virtual Image Correlation with variable cross-section
- Jean-Charles Passieux, Institut Clément Ader
14:30-14:50 (20min)
› Material testing 2.0 for viscoelasticity : characteristic time sensitivity vs experiment duration
- Margot Leclercq, Université Paris Saclay, ENS Paris-Saclay, CentraleSupélec, CNRS, LMPS, 91190, Gif-sur-Yvette, France
14:50-15:10 (20min)
› Optimising test sequences for robust material identification using a data assimilation approach
- Marie Guerder, Institut Clément Ader
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
DIC
223
Iniyan Thiruselvam N.
› Deformation Behavior Analysis of Honeycomb Structure Under In-plane Compression Using Global DIC
- Yamaguchi Yuki, Aoyama Gakuin University
13:50-14:10 (20min)
› Full-Field Mechanical Deformation Behaviour of Different Metallic Laser Welded Joints under Tensile Loadings
- Patricio Carrion, Sandia National Laboratories [Albuquerque]
14:10-14:30 (20min)
› DIC for Detection of Embedded Structures
- Izabela Nowakowska, Heriot-Watt University
14:30-14:50 (20min)
› Application of digital image correlation in the characterization of metal powder spreadability for additive manufacturing
- Lukas Daut, Oregon State University; School of Mechanical, Industrial, and Manufacturing Engineering
14:50-15:10 (20min)
› Development of a digital image correlation system for in-situ epoxy cure shrinkage, thermal expansion, and wafer warpage measurements
- Alexander Landauer, National Institute of Standards and Technology
15:10-15:30 (20min)
15:30 - 16:00 (30min)
Coffee break
Second floor
16:00 - 17:20 (1h20)
Volume measurements
109
Brian Bay
› Using DVC to measure manufacturing differences in 3D woven composite parts
- Arturo Mendoza, Safran Tech, Laboratoire de Mécanique Paris-Saclay
16:00-16:20 (20min)
› Debonding quantification via Digital Volume Correlation. Application to a mortar reinforcement pull-out.
- Sylvain Langlois, Laboratoire de Mécanique Paris-Saclay
16:20-16:40 (20min)
› Projection enhanced DVC to analyze relaxation and crack propagation until failure on architectured aluminum alloy
- Viktor Kosin, Ecole Normale Supérieure Paris-Saclay, Leibniz University Hannover
16:40-17:00 (20min)
› 3D virtual image correlation (3D-VIC) for lattice structures metrology using x-ray radiographs
- Julien Réthoré, Nantes Université, Ecole Centrale Nantes, CNRS, GeM, UMR 6183, 1 rue de la Noë, France
17:00-17:20 (20min)
16:00 - 17:20 (1h20)
Inverse and identification methods
110
Elizabeth Jones
› Constitutive model validity evaluation for MT 2.0 applications
- Amar Peshave, MatchID NV
16:00-16:20 (20min)
› Identification of heterogeneous elastic parameters with the Equilibrium Gap Method
- Rémi Haustrate, LMPS - Laboratoire de Mécanique Paris-Saclay, 91190, Gif-sur-Yvette, France.
16:20-16:40 (20min)
› Spatial mapping of plastic properties in welds with the VFM
- Robert Hamill, University of Southampton
16:40-17:00 (20min)
› A crystal plasticity-based intragranular stress fields identification framework: application to commercially pure aluminium
- Raphaël Langlois, Nantes Université, Ecole Centrale Nantes, CNRS, GeM, UMR 6183, 1 rue de la Noë, F-44321 Nantes, France
17:00-17:20 (20min)
16:00 - 17:20 (1h20)
Softwares
223
Mark Iadicola
› The Stereo-DIC Challenge 2.0: DIC Strain Comparisons Using Common Images
- Phillip Reu, Sandia National Laboratories [Albuquerque]
16:00-16:20 (20min)
› R3XA: Toward a metadata standard for experimental (photo)mechanics datasets
- Jean-Charles Passieux, Institut Clément Ader
16:20-16:40 (20min)
› iDVC - Open-Source Interactive Software for Digital Volume Correlation
- Danica Sugic, STFC Rutherford Appleton Laboratory
16:40-17:00 (20min)
› uCheckMate : An open-source python library for research and development of Finite element stereo digital image correlation
- Houssein MATAR, Institut Pascal
17:00-17:20 (20min)
18:00 - 19:00 (1h)
City tour
Visiting Clermont-Ferrand old downtown
19:00 - 21:00 (2h)
Townhall's cocktail
8:30 - 10:10 (1h40)
Small scale
A0002
João Quinta da Fonseca
› Automated, quantitative identification of slip system, twinning & boundary sliding activity maps from EBSD-SEM-DIC data
- Johan Hoefnagels, Eindhoven University of Technology
08:30-08:50 (20min)
› High resolution 3D stereo DIC for small FOV using the Scheimpflug principle
- Hendrik Pulju, isi-sys GmbH
08:50-09:10 (20min)
› Study of strain localization and crystal reorientation at the early stage of plastic deformation using LSCM, HR-EBSD and DCT-6D
- Damien TEXIER, Institut Clément Ader
09:10-09:30 (20min)
› Elevated temperature High Resolution Digital Image Correlation in a Scanning Electron Microscope
- Allan Harte, UK Atomic Energy Authority
09:30-09:50 (20min)
› Micro-computed topography from SEM backscattered electron multidetector images
- Stéphane Roux, Laboratoire de Mécanique Paris-Saclay (LMPS)
09:50-10:10 (20min)
10:10 - 11:40 (1h30)
Poster
A103
› Identification of heterogeneous elastic limits inpolycrystalline 316L austenitic stainless steelduring tensile loading
- Qi HU, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013
10:10-11:40 (1h30)
› High Throughput Tensile Testing for Characterization of Static Strain Aging
- Ville Björklund, Aalto University School of Engineering, Department of Mechanical Engineering, PO Box 14200, FI-00076 Aalto, Finland
10:10-11:40 (1h30)
› Using full-fields measurements to determine the influence of crack velocity and non-singular terms on KIC of an epoxy resin
- Bastien Lammens, DMAS, ONERA, F-59014 Lille, France
10:10-11:40 (1h30)
› Measuring the displacement of masonry stones by motion capture
- Julien Archez, Laboratoire Navier
10:10-11:40 (1h30)
› Residual stress measurement in tire cables by FIB hole drilling
- Raphaël Engel, Laboratoire de Mécanique Paris-Saclay
10:10-11:40 (1h30)
› Real-time measurement of surface strain for understanding creep behavior in bending polymer films
- JIAYI YU, Department of Chemical Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology [Tokyo], Laboratory for Chemistry and Life Science, Institute of Innovative Research, Tokyo Institute of Technology [Tokyo]
10:10-11:40 (1h30)
10:10 - 11:40 (1h30)
Poster
102
› Statistical study of intermittent calorific phenomena associated to the Portevin-Le Chatelier effect in an aluminum alloy
- Antoine JURY, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal
10:10-11:40 (1h30)
› Simultaneous thermal and kinematic full-field measurements on optimal patterns based on thermography and spectral analysis
- Thomas Jailin, Université Clermont Auvergne, CNRS, Clermont Auvergne INP, Institut Pascal, BP 10448, 63000
10:10-11:40 (1h30)
› Quantifying thermo-elastic cooling and heating during tensile strength testing of solid engineering alloys with a highly sensitive cooled infrared camera
- STEPHANE BOUBANGA TOMBET, Telops
10:10-11:40 (1h30)
› Michelin's Talk for PM-iDICs 2024 abstracts
- UMRANI Florian, Michelin - Sophie Charpin, Michelin
10:10-11:40 (1h30)
› Overview of Digital Image Correlation in Aerospace Engineering in India
- Abhishek Gurudutt, Pyrodynamics
10:10-11:40 (1h30)
10:10 - 11:40 (1h30)
Poster
104
› Identifying forces in 2D granular materials using the Virtual Fields Method from strains measured by Localized Spectrum Analysis
- Kunanon Jongchansitto, Chiang Mai University
10:10-11:40 (1h30)
› Characterization of the effect of roughness on dynamic ruptures along frictional interfaces
- Saba Robinary, NANTES UNIVERSITÉ - École Centrale de Nantes
10:10-11:40 (1h30)
› Digital Image Correlation Study of Surface Defects on Plastic Bonded Explosives
- John Graham, Lawrence Livermore National Laboratory
10:10-11:40 (1h30)
› Analyses of grain-scale strain heterogeneities to provide input for polycrystalline models
- Jean-Patrick Goulmy, Mechanics surfaces and materials processing (MSMP)
10:10-11:40 (1h30)
› Microstructural study of additively manufactured ALF357 alloy: Effect of tensile loading and build orientations
- Avinash Mohan, Indian Institute of Technology Madras
10:10-11:40 (1h30)
› Strain signature of solid-solid phase transitions within a diamond anvil cell
- Nicolas Bruzy, CEA DAM Bruyères le Châtel
10:10-11:40 (1h30)
› Understanding Anisotropy of Carbon-reinforced PEEK Using Stereo DIC
- Vipin Gupta, Birla Institute of Technology and Science
10:10-11:40 (1h30)
10:10 - 11:40 (1h30)
Poster
108
› An imaging technique for the strain-engineering of deformable electrodes
- Fabien Amiot, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174)
10:10-11:40 (1h30)
› Developing a new optical strain gage for full-field measurements
- Adrien Vinel, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal
10:10-11:40 (1h30)
› Elimination of Interpolation Error in Digital Volume Correlation
- Samuel Wantz, Institut Pprime, CEntre Technique des Industries Mécaniques
10:10-11:40 (1h30)
› DIC data filtering proposal for complex environments
- Gweni Alonso Aruffo, IMT Mines Albi, Centre ICA-A, Albi - Rébecca Bonnaire, IMT Mines Albi, Centre ICA-A, Albi
10:10-11:40 (1h30)
› Evaluation of Influences on Results of Digital Image Correlation by Window of Constant Temperature Bath
- Ayano Seki, Aoyama Gakuin University
10:10-11:40 (1h30)
11:40 - 12:30 (50min)
Keynote
A0002
Brian Bay & Phil Reu
› From random speckles to checkerboard patterns
- Michel Grédiac, Université Clermont Auvergne
11:40-12:30 (50min)
12:30 - 14:00 (1h30)
Lunch
Last floor
13:15 - 13:55 (40min)
iDICs meeting - DIC Challenge
109
Benoît Blaysat
14:00 - 15:40 (1h40)
Materials
109
Michel Coret
› Understanding the behaviour of a Cu-CuAl functionally-graded alloy using DIC
- Filipa Cunha, Faculdade de Ciências e Tecnologia = School of Science & Technology
14:00-14:20 (20min)
› Localized Deformation and Band Formation in Superelastic Nitinol Wires
- Dinc Erdeniz, University of Cincinnati
14:20-14:40 (20min)
› Strength characterisation of Nicrofer–Stellite joint using Digital Image Correlation
- N. Iniyan Thiruselvam, BITS Pilani K. K. Birla Goa campus, Goa 403726
14:40-15:00 (20min)
› Experimental Quantification of Ultraslow Slip Rate of Shear Interfaces Using Digital Image Correlation
- Vito Rubino, NANTES UNIVERSITÉ - École Centrale de Nantes
15:00-15:20 (20min)
14:00 - 15:40 (1h40)
Aerospace
110
Phil Reu
› Building simulation models credibility: the role of DIC in a complex structural testing environment
- Pierre Baudoin, EikoSim
14:00-14:20 (20min)
› DIC data integration to achieve multi-measurement system on full-scale wing tests
- Emily Rolfe, AIRBUS Operations Ltd.
14:20-14:40 (20min)
› Full Field Imaging and Data Fusion for Substructural Testing
- Riccardo Cappello, University of Bristol
14:40-15:00 (20min)
› Using DIC for Full-Field Measurement of Long Slender Structures
- Matlock Mennu, NASA Langley Research Center [Hampton]
15:00-15:20 (20min)
14:00 - 15:20 (1h20)
Thermography
223
Janice Barton
› Investigation of the dissipative mechanisms in 3D layer-to-layer woven composite under cyclic loading
- Vincent Le Saux, Institut de Recherche Dupuy de Lôme (IRDL)
14:00-14:20 (20min)
› Investigating heterogeneous strain-induced crystallization in natural rubber with infrared thermography based micro-surface calorimetry
- Jean-Benoît LE CAM, Institut de Physique, Université de Rennes 1
14:20-14:40 (20min)
› Infrared Thermography Applied to In-Situ Crack Growth Assessment
- Lorenzo Bercelli, Institut de Recherche Dupuy de Lôme
14:40-15:00 (20min)
› Evaluation of Conduction Thermography for Surface Crack Detection in Titanium Specimens: Preliminary Offline Tests and Initial Online Monitoring During Fatigue Tests
- Rosa De Finis, Università del Salento
15:00-15:20 (20min)
16:00 - 22:30 (6h30)
Social event
In front of the building
18:10 - 19:00 (50min)
Keynote
Johan Hoefnagels
› Measuring and modelling the elastoplastic transition in engineering alloys at the microstructural scale
- João Quinta da Fonseca, University of Manchester [Manchester]
18:10-19:00 (50min)
8:30 - 10:30 (2h)
Fracture
A0002
Jan Neggers
› Automated crack detection in laminated composite materials from optical flow measurements
- Matthieu Nicol, ONERA, DMAS, Université Paris-Saclay, 29 avenue de la Division Leclerc, 92320 Châtillon, France
08:30-08:50 (20min)
› Stereocorrelation to analyze crack propagation until failure during a shaking table test
- Amelie Fau, Laboratoire de Mécanique Paris-Saclay
08:50-09:10 (20min)
› In-situ 2D-DIC as a crack growth analysis tool for high-cycle fatigue bending tests
- linamaria Gallegos Mayorga, École Nationale Supérieure d'Arts et Métiers
09:10-09:30 (20min)
› Enhanced snow fracture toughness estimates through digital image correlation analysis of the elastic behaviour of weak snowpack layers
- Melin Walet, WSL Institute for Snow and Avalanche Research SLF, Davos Dorf
09:30-09:50 (20min)
› Study of different DIC approaches to measure crack opening/closing levels in a biaxial crack growth trial with combined HCF/LCF loads
- Andreas Blug, Fraunhofer Institute for Physical Measurement Techniques IPM
09:50-10:10 (20min)
› A new methodology exploiting digital image correlation to detect crack initiation
- Sylvia Feld-Payet, DMAS, ONERA, Université Paris Saclay [Châtillon]
10:10-10:30 (20min)
10:30 - 11:00 (30min)
Break
Second floor
11:00 - 11:50 (50min)
Keynote
A0002
Robin Bouclier
› Preconditioned conjugate gradient solver for the linearized optical flow systems
- Pierre Gosselet, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013
11:00-11:50 (50min)
11:50 - 12:30 (40min)
Minisymposium: Math & Algorithms
A0002
Robin Bouclier
› Large Motion Tracking Regularization with the Finite Strain Formulation of the Discrete Equilibrium Gap Principle
- Martin Genet, Mathematical and Mechanical Modeling with Data Interaction in Simulations for Medicine
11:50-12:10 (20min)
› A Procedure for Global Non-Local Digital Image Correlation (NL-DIC)
- Tushar Bhandari, Indian Institute of Technology Kharagpur
12:10-12:30 (20min)
12:30 - 14:00 (1h30)
Lunch
Last floor
13:15 - 13:55 (40min)
iDICs meeting - Standardization Committee
109
Mark Iadicola
14:00 - 15:40 (1h40)
Uncertainty quantification
109
Thorsten Siebert
› Development of a virtual DIC approach to improve measurement accuracy and assess experimental setups
- O. Tyley, University of Bristol [Bristol]
14:00-14:20 (20min)
› Image-based data pipeline for fusion engineering qualification and model validation
- Adel Tayeb, UKAEA
14:20-14:40 (20min)
› Practical assessment of DIC uncertainties in view of FE model validation
- Fabrice Pierron, MatchID NV
14:40-15:00 (20min)
› FE validation from DIC data: a practical case study in bending
- Vahid Firouzbakht, MatchID NV
15:00-15:20 (20min)
› Vibration Measurements: Effect of Varying Exposure Time on Digital Image Correlation
- Hubert Schreier, Correlated Solutions Inc.
15:20-15:40 (20min)
14:00 - 15:40 (1h40)
Thermography
110
Xavier Balandraud
› An efficient approach for identifying the coefficients of thermal expansion of CFRPs
- Janice Dulieu-Barton, Bristol Composites Institute, School of Aerospace, and Mechanical Engineering, University of Bristol
14:00-14:20 (20min)
› Study of Non-Adiabatic Thermoelastic Effect in Face-sheet/Core Debonded Composite Sandwich Structures by Means of Full Field Imaging
- Emily H. L. Leung, Bristol Composites Institute, School of Aerospace, and Mechanical Engineering, University of Bristol
14:20-14:40 (20min)
› Characterization of deformation behavior in metallic alloys using high-temperature digital image correlation analysis
- Seung-Yong Lee, Materials Characterization Center, Korea Institute of Materials Science
14:40-15:00 (20min)
› Thermal investigations of supercritical CO2 jet impingement and jet structure influence on its cooling ability
- Maha El nahas, Institut Clément Ader
15:00-15:20 (20min)
› Multi-physic calibration for coupled IR Thermography - Stereo DIC sensor: from target to software
- Théo SENTAGNE, DGA Techniques aérospatiales, Institut Clément Ader
15:20-15:40 (20min)
14:00 - 15:40 (1h40)
Minisymposium: Math & Algorithms
223
Julien Réthoré
› High-Performance Mechanically Regularized Finite-Element Digital Volume Correlation for Complex Architectured Materials
- Lucas Person, Ecole Normale Supérieure Paris-Saclay, Institut Clément Ader, Institut de Mathématiques de Toulouse UMR5219
14:00-14:20 (20min)
› Beyond Nyquist Theorem: Reconstruction algorithms of down-sampled signals for vision-based vibration measurements
- Davide Mastrodicasa, Siemens Industry Software NV, Vrije Universiteit [Brussel]
14:20-14:40 (20min)
› IBIS : Imaging bifurcations in 2D periodic metamaterials
- Fabien Amiot, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174)
14:40-15:00 (20min)
› The impact of metrics in mechanical imaging
- Jean-François Witz, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013
15:00-15:20 (20min)
› Isogeometric surface fitting from tomographic images
- Dorian BICHET, Institut de Mathématiques de Toulouse UMR5219, Institut Clément Ader
15:20-15:40 (20min)
15:40 - 16:10 (30min)
Coffee break
Second floor
16:10 - 17:10 (1h)
AI
223
Jean-François Witz
› A pseudo-DIC algorithm based on Convolutional Neural Networks
- Marco Rossi, Università Politecnica delle Marche [Ancona]
16:10-16:30 (20min)
› Training an AI hyperelastic constitutive model with experimental data
- Clément Jailin, LMPS - Laboratoire de Mécanique Paris-Saclay, 91190, Gif-sur-Yvette, France
16:30-16:50 (20min)
16:10 - 17:10 (1h)
Uncertainty quantification
109
Markus Klein
› A Verification Method for Stereo-DIC for Use in the Forming Limit Standard Test Method
- Mark Iadicola, National Institute of Standards and Technology
16:10-16:30 (20min)
› Tradeoffs in Lighting when applying Digital Image Correlation to Vibration-based Fatigue Testing
- Ryan Berke, Utah State University
16:30-16:50 (20min)
› Improvement of Measurement Uncertainty Using Multi-camera DIC system and Its Benefits in Actual Applications
- LiKang Luan, Dantec Dynamics GmbH
16:50-17:10 (20min)
16:10 - 17:10 (1h)
Minisymposium: Patterning
110
Linamaria Gallegos Mayorga
› Fourier Synthesis of Patterns Optimized for DIC
- Sven Bossuyt, School of Engineering [Aalto]
16:10-16:30 (20min)
› DIC monitoring of a half-scale masonry building subjected to cyclic quasi-static loading
- Nathanaël Savalle, Institut national polytechnique Clermont Auvergne
16:30-16:50 (20min)
› 3D Deformation measurement on a rifle using Multi-Camera High-Speed DIC
- Thorsten Siebert, LaVision (GERMANY)
16:50-17:10 (20min)
17:20 - 17:50 (30min)
Closure
A0002
