Planning
Tuesday, October 29, 2024
| Time |
Event |
(+)
|
|
08:00 - 09:00
|
Welcome |
|
|
09:00 - 09:30
|
Opening speech (A0002) |
|
|
09:30 - 10:20
|
Keynote (A0002) - Benoit Blaysat |
(+)
|
|
09:30 - 10:20 |
› Chasing anticracks - How PTV and DIC revolutionized snow avalanche research - Alec Van Herwijnen, WSL Institute for Snow and Avalanche Research SLF |
|
|
10:20 - 10:50
|
Coffee break (Second floor) |
|
|
10:50 - 11:50
|
Extrem (A0002) - Marco Rossi |
(+)
|
|
10:50 - 11:20 |
› X-ray digital image correlation for deformation measurements in extreme environments - Elizabeth Jones, Sandia National Laboratories |
|
|
11:10 - 11:30 |
› Deformation of CANDU Pressure Tube under Biaxial Stress State at High Temperatures - Chukwudi Azih, Canadian Nuclear Laboratories |
|
|
11:30 - 11:50 |
› A SHPB digital twin for the optimization of specimens dedicated to heterogeneous high strain rate tests - Thomas Fourest, DMAS, ONERA, 59000, Lille, France |
|
|
11:50 - 12:30
|
Vendors (A0002) |
|
|
12:30 - 13:50
|
Lunch (Last floor) |
|
|
13:50 - 15:30
|
Volume measurements (109) - Clément Jailin |
(+)
|
|
13:50 - 14:10 |
› Universal Tomographic Calibration: Achieving 1/100th Voxel Digital Volume Correlation (DVC) Displacement Precision - Alex Arzoumanidis, Psylotech, Inc. - Brian Bay, Oregon State University; School of Mechanical, Industrial, and Manufacturing Engineering - André Phillion, McMaster University [Hamilton, Ontario] |
|
|
14:10 - 14:30 |
› Dual X-ray and Neutron tomography to observe hydro-mechanics in porous media - Hilario Greggi, 3SR Lab |
|
|
14:30 - 14:50 |
› Optical Scanning Tomography to measure harmonic displacement fields and to identify visco-elastic parameters distributions - Bertrand Wattrisse, Laboratoire de Mécanique et Génie Civil |
|
|
14:50 - 15:10 |
› Towards color X-ray tomography: Detection of small quartz grains via contrast-enhanced 3D images of carbonate rocks using a CdTe Photon Counting Detector - Franck Decroos, Laboratoire Navier |
|
|
15:10 - 15:30 |
› Measuring residual stresses in 3D woven composite fan blades via DVC - Yannick YASOTHAN, Laboratoire de Mécanique Paris-Saclay |
|
|
13:50 - 15:30
|
Inverse and identification methods (110) - Fabrice Pierron |
(+)
|
|
13:50 - 14:10 |
› Boundary conditions and constitutive parameter identification - Antoine Vintache, EikoSim, Laboratoire de Mécanique Paris-Saclay |
|
|
14:10 - 14:30 |
› Characterization of anisotropic hyperelastic behavior with a data-driven approach - Annie Morch, Institut de Recherche en Génie Civil et Mécanique Nantes université |
|
|
14:30 - 14:50 |
› Image-based B-Spline beam models of architected materials using Virtual Image Correlation with variable cross-section - Jean-Charles Passieux, Institut Clément Ader |
|
|
14:50 - 15:10 |
› Material testing 2.0 for viscoelasticity : characteristic time sensitivity vs experiment duration - Margot Leclercq, Université Paris Saclay, ENS Paris-Saclay, CentraleSupélec, CNRS, LMPS, 91190, Gif-sur-Yvette, France |
|
|
15:10 - 15:30 |
› Optimising test sequences for robust material identification using a data assimilation approach - Marie Guerder, Institut Clément Ader |
|
|
13:50 - 15:30
|
DIC (223) - Iniyan Thiruselvam N. |
(+)
|
|
13:50 - 14:10 |
› Deformation Behavior Analysis of Honeycomb Structure Under In-plane Compression Using Global DIC - Yamaguchi Yuki, Aoyama Gakuin University |
|
|
14:10 - 14:30 |
› Full-Field Mechanical Deformation Behaviour of Different Metallic Laser Welded Joints under Tensile Loadings - Patricio Carrion, Sandia National Laboratories [Albuquerque] |
|
|
14:30 - 14:50 |
› DIC for Detection of Embedded Structures - Izabela Nowakowska, Heriot-Watt University |
|
|
14:50 - 15:10 |
› Application of digital image correlation in the characterization of metal powder spreadability for additive manufacturing - Lukas Daut, Oregon State University; School of Mechanical, Industrial, and Manufacturing Engineering |
|
|
15:10 - 15:30 |
› Development of a digital image correlation system for in-situ epoxy cure shrinkage, thermal expansion, and wafer warpage measurements - Alexander Landauer, National Institute of Standards and Technology |
|
|
15:30 - 16:00
|
Coffee break (Second floor) |
|
|
16:00 - 17:20
|
Volume measurements (109) - Brian Bay |
(+)
|
|
16:00 - 16:20 |
› Using DVC to measure manufacturing differences in 3D woven composite parts - Arturo Mendoza, Safran Tech, Laboratoire de Mécanique Paris-Saclay |
|
|
16:20 - 16:40 |
› Debonding quantification via Digital Volume Correlation. Application to a mortar reinforcement pull-out. - Sylvain Langlois, Laboratoire de Mécanique Paris-Saclay |
|
|
16:40 - 17:00 |
› Projection enhanced DVC to analyze relaxation and crack propagation until failure on architectured aluminum alloy - Viktor Kosin, Ecole Normale Supérieure Paris-Saclay, Leibniz University Hannover |
|
|
17:00 - 17:20 |
› 3D virtual image correlation (3D-VIC) for lattice structures metrology using x-ray radiographs - Julien Réthoré, Nantes Université, Ecole Centrale Nantes, CNRS, GeM, UMR 6183, 1 rue de la Noë, France |
|
|
16:00 - 17:20
|
Inverse and identification methods (110) - Elizabeth Jones |
(+)
|
|
16:00 - 16:20 |
› Constitutive model validity evaluation for MT 2.0 applications - Amar Peshave, MatchID NV |
|
|
16:20 - 16:40 |
› Identification of heterogeneous elastic parameters with the Equilibrium Gap Method - Rémi Haustrate, LMPS - Laboratoire de Mécanique Paris-Saclay, 91190, Gif-sur-Yvette, France. |
|
|
16:40 - 17:00 |
› Spatial mapping of plastic properties in welds with the VFM - Robert Hamill, University of Southampton |
|
|
17:00 - 17:20 |
› A crystal plasticity-based intragranular stress fields identification framework: application to commercially pure aluminium - Raphaël Langlois, Nantes Université, Ecole Centrale Nantes, CNRS, GeM, UMR 6183, 1 rue de la Noë, F-44321 Nantes, France |
|
|
16:00 - 17:20
|
Softwares (223) - Mark Iadicola |
(+)
|
|
16:00 - 16:20 |
› The Stereo-DIC Challenge 2.0: DIC Strain Comparisons Using Common Images - Phillip Reu, Sandia National Laboratories [Albuquerque] |
|
|
16:20 - 16:40 |
› R3XA: Toward a metadata standard for experimental (photo)mechanics datasets - Jean-Charles Passieux, Institut Clément Ader |
|
|
16:40 - 17:00 |
› iDVC - Open-Source Interactive Software for Digital Volume Correlation - Danica Sugic, STFC Rutherford Appleton Laboratory |
|
|
17:00 - 17:20 |
› uCheckMate : An open-source python library for research and development of Finite element stereo digital image correlation - Houssein MATAR, Institut Pascal |
|
|
18:00 - 19:00
|
City tour - Visiting Clermont-Ferrand old downtown |
|
|
19:00 - 21:00
|
Townhall's cocktail |
|
Wednesday, October 30, 2024
| Time |
Event |
(+)
|
|
08:30 - 10:10
|
Small scale (A0002) - João Quinta da Fonseca |
(+)
|
|
08:30 - 08:50 |
› Automated, quantitative identification of slip system, twinning & boundary sliding activity maps from EBSD-SEM-DIC data - Johan Hoefnagels, Eindhoven University of Technology |
|
|
08:50 - 09:10 |
› High resolution 3D stereo DIC for small FOV using the Scheimpflug principle - Hendrik Pulju, isi-sys GmbH |
|
|
09:10 - 09:30 |
› Study of strain localization and crystal reorientation at the early stage of plastic deformation using LSCM, HR-EBSD and DCT-6D - Damien TEXIER, Institut Clément Ader |
|
|
09:30 - 09:50 |
› Elevated temperature High Resolution Digital Image Correlation in a Scanning Electron Microscope - Allan Harte, UK Atomic Energy Authority |
|
|
09:50 - 10:10 |
› Micro-computed topography from SEM backscattered electron multidetector images - Stéphane Roux, Laboratoire de Mécanique Paris-Saclay (LMPS) |
|
|
10:10 - 11:40
|
Poster (A103) |
(+)
|
|
10:10 - 11:40 |
› Identification of heterogeneous elastic limits inpolycrystalline 316L austenitic stainless steelduring tensile loading - Qi HU, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013 |
|
|
10:10 - 11:40 |
› High Throughput Tensile Testing for Characterization of Static Strain Aging - Ville Björklund, Aalto University School of Engineering, Department of Mechanical Engineering, PO Box 14200, FI-00076 Aalto, Finland |
|
|
10:10 - 11:40 |
› Using full-fields measurements to determine the influence of crack velocity and non-singular terms on KIC of an epoxy resin - Bastien Lammens, DMAS, ONERA, F-59014 Lille, France |
|
|
10:10 - 11:40 |
› Measuring the displacement of masonry stones by motion capture - Julien Archez, Laboratoire Navier |
|
|
10:10 - 11:40 |
› Residual stress measurement in tire cables by FIB hole drilling - Raphaël Engel, Laboratoire de Mécanique Paris-Saclay |
|
|
10:10 - 11:40 |
› Real-time measurement of surface strain for understanding creep behavior in bending polymer films - JIAYI YU, Department of Chemical Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology [Tokyo], Laboratory for Chemistry and Life Science, Institute of Innovative Research, Tokyo Institute of Technology [Tokyo] |
|
|
10:10 - 11:40
|
Poster (102) |
(+)
|
|
10:10 - 11:40 |
› Statistical study of intermittent calorific phenomena associated to the Portevin-Le Chatelier effect in an aluminum alloy - Antoine JURY, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal |
|
|
10:10 - 11:40 |
› Simultaneous thermal and kinematic full-field measurements on optimal patterns based on thermography and spectral analysis - Thomas Jailin, Université Clermont Auvergne, CNRS, Clermont Auvergne INP, Institut Pascal, BP 10448, 63000 |
|
|
10:10 - 11:40 |
› Quantifying thermo-elastic cooling and heating during tensile strength testing of solid engineering alloys with a highly sensitive cooled infrared camera - STEPHANE BOUBANGA TOMBET, Telops |
|
|
10:10 - 11:40 |
› Michelin's Talk for PM-iDICs 2024 abstracts - UMRANI Florian, Michelin - Sophie Charpin, Michelin |
|
|
10:10 - 11:40 |
› Overview of Digital Image Correlation in Aerospace Engineering in India - Abhishek Gurudutt, Pyrodynamics |
|
|
10:10 - 11:40
|
Poster (104) |
(+)
|
|
10:10 - 11:40 |
› Identifying forces in 2D granular materials using the Virtual Fields Method from strains measured by Localized Spectrum Analysis - Kunanon Jongchansitto, Chiang Mai University |
|
|
10:10 - 11:40 |
› Characterization of the effect of roughness on dynamic ruptures along frictional interfaces - Saba Robinary, NANTES UNIVERSITÉ - École Centrale de Nantes |
|
|
10:10 - 11:40 |
› Digital Image Correlation Study of Surface Defects on Plastic Bonded Explosives - John Graham, Lawrence Livermore National Laboratory |
|
|
10:10 - 11:40 |
› Analyses of grain-scale strain heterogeneities to provide input for polycrystalline models - Jean-Patrick Goulmy, Mechanics surfaces and materials processing (MSMP) |
|
|
10:10 - 11:40 |
› Microstructural study of additively manufactured ALF357 alloy: Effect of tensile loading and build orientations - Avinash Mohan, Indian Institute of Technology Madras |
|
|
10:10 - 11:40 |
› Strain signature of solid-solid phase transitions within a diamond anvil cell - Nicolas Bruzy, CEA DAM Bruyères le Châtel |
|
|
10:10 - 11:40 |
› Understanding Anisotropy of Carbon-reinforced PEEK Using Stereo DIC - Vipin Gupta, Birla Institute of Technology and Science |
|
|
10:10 - 11:40
|
Poster (108) |
(+)
|
|
10:10 - 11:40 |
› An imaging technique for the strain-engineering of deformable electrodes - Fabien Amiot, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) |
|
|
10:10 - 11:40 |
› Developing a new optical strain gage for full-field measurements - Adrien Vinel, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal |
|
|
10:10 - 11:40 |
› Elimination of Interpolation Error in Digital Volume Correlation - Samuel Wantz, Institut Pprime, CEntre Technique des Industries Mécaniques |
|
|
10:10 - 11:40 |
› DIC data filtering proposal for complex environments - Gweni Alonso Aruffo, IMT Mines Albi, Centre ICA-A, Albi - Rébecca Bonnaire, IMT Mines Albi, Centre ICA-A, Albi |
|
|
10:10 - 11:40 |
› Evaluation of Influences on Results of Digital Image Correlation by Window of Constant Temperature Bath - Ayano Seki, Aoyama Gakuin University |
|
|
11:40 - 12:30
|
Keynote (A0002) - Brian Bay & Phil Reu |
(+)
|
|
11:40 - 12:30 |
› From random speckles to checkerboard patterns - Michel Grédiac, Université Clermont Auvergne |
|
|
12:30 - 14:00
|
Lunch (Last floor) |
|
|
13:15 - 13:55
|
iDICs meeting - DIC Challenge (109) - Benoît Blaysat |
|
|
14:00 - 15:40
|
Materials (109) - Michel Coret |
(+)
|
|
14:00 - 14:20 |
› Understanding the behaviour of a Cu-CuAl functionally-graded alloy using DIC - Filipa Cunha, Faculdade de Ciências e Tecnologia = School of Science & Technology |
|
|
14:20 - 14:40 |
› Localized Deformation and Band Formation in Superelastic Nitinol Wires - Dinc Erdeniz, University of Cincinnati |
|
|
14:40 - 15:00 |
› Strength characterisation of Nicrofer–Stellite joint using Digital Image Correlation - N. Iniyan Thiruselvam, BITS Pilani K. K. Birla Goa campus, Goa 403726 |
|
|
15:00 - 15:20 |
› Experimental Quantification of Ultraslow Slip Rate of Shear Interfaces Using Digital Image Correlation - Vito Rubino, NANTES UNIVERSITÉ - École Centrale de Nantes |
|
|
14:00 - 15:40
|
Aerospace (110) - Phil Reu |
(+)
|
|
14:00 - 14:20 |
› Building simulation models credibility: the role of DIC in a complex structural testing environment - Pierre Baudoin, EikoSim |
|
|
14:20 - 14:40 |
› DIC data integration to achieve multi-measurement system on full-scale wing tests - Emily Rolfe, AIRBUS Operations Ltd. |
|
|
14:40 - 15:00 |
› Full Field Imaging and Data Fusion for Substructural Testing - Riccardo Cappello, University of Bristol |
|
|
15:00 - 15:20 |
› Using DIC for Full-Field Measurement of Long Slender Structures - Matlock Mennu, NASA Langley Research Center [Hampton] |
|
|
14:00 - 15:20
|
Thermography (223) - Janice Barton |
(+)
|
|
14:00 - 14:20 |
› Investigation of the dissipative mechanisms in 3D layer-to-layer woven composite under cyclic loading - Vincent Le Saux, Institut de Recherche Dupuy de Lôme (IRDL) |
|
|
14:20 - 14:40 |
› Investigating heterogeneous strain-induced crystallization in natural rubber with infrared thermography based micro-surface calorimetry - Jean-Benoît LE CAM, Institut de Physique, Université de Rennes 1 |
|
|
14:40 - 15:00 |
› Infrared Thermography Applied to In-Situ Crack Growth Assessment - Lorenzo Bercelli, Institut de Recherche Dupuy de Lôme |
|
|
15:00 - 15:20 |
› Evaluation of Conduction Thermography for Surface Crack Detection in Titanium Specimens: Preliminary Offline Tests and Initial Online Monitoring During Fatigue Tests - Rosa De Finis, Università del Salento |
|
|
16:00 - 22:30
|
Social event (In front of the building) |
|
|
18:10 - 19:00
|
Keynote - Johan Hoefnagels |
(+)
|
|
18:10 - 19:00 |
› Measuring and modelling the elastoplastic transition in engineering alloys at the microstructural scale - João Quinta da Fonseca, University of Manchester [Manchester] |
|
Thursday, October 31, 2024
| Time |
Event |
(+)
|
|
08:30 - 10:30
|
Fracture (A0002) - Jan Neggers |
(+)
|
|
08:30 - 08:50 |
› Automated crack detection in laminated composite materials from optical flow measurements - Matthieu Nicol, ONERA, DMAS, Université Paris-Saclay, 29 avenue de la Division Leclerc, 92320 Châtillon, France |
|
|
08:50 - 09:10 |
› Stereocorrelation to analyze crack propagation until failure during a shaking table test - Amelie Fau, Laboratoire de Mécanique Paris-Saclay |
|
|
09:10 - 09:30 |
› In-situ 2D-DIC as a crack growth analysis tool for high-cycle fatigue bending tests - linamaria Gallegos Mayorga, École Nationale Supérieure d'Arts et Métiers |
|
|
09:30 - 09:50 |
› Enhanced snow fracture toughness estimates through digital image correlation analysis of the elastic behaviour of weak snowpack layers - Melin Walet, WSL Institute for Snow and Avalanche Research SLF, Davos Dorf |
|
|
09:50 - 10:10 |
› Study of different DIC approaches to measure crack opening/closing levels in a biaxial crack growth trial with combined HCF/LCF loads - Andreas Blug, Fraunhofer Institute for Physical Measurement Techniques IPM |
|
|
10:10 - 10:30 |
› A new methodology exploiting digital image correlation to detect crack initiation - Sylvia Feld-Payet, DMAS, ONERA, Université Paris Saclay [Châtillon] |
|
|
10:30 - 11:00
|
Break (Second floor) |
|
|
11:00 - 11:50
|
Keynote (A0002) - Robin Bouclier |
(+)
|
|
11:00 - 11:50 |
› Preconditioned conjugate gradient solver for the linearized optical flow systems - Pierre Gosselet, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013 |
|
|
11:50 - 12:30
|
Minisymposium: Math & Algorithms (A0002) - Robin Bouclier |
(+)
|
|
11:50 - 12:10 |
› Large Motion Tracking Regularization with the Finite Strain Formulation of the Discrete Equilibrium Gap Principle - Martin Genet, Mathematical and Mechanical Modeling with Data Interaction in Simulations for Medicine |
|
|
12:10 - 12:30 |
› A Procedure for Global Non-Local Digital Image Correlation (NL-DIC) - Tushar Bhandari, Indian Institute of Technology Kharagpur |
|
|
12:30 - 14:00
|
Lunch (Last floor) |
|
|
13:15 - 13:55
|
iDICs meeting - Standardization Committee (109) - Mark Iadicola |
|
|
14:00 - 15:40
|
Uncertainty quantification (109) - Thorsten Siebert |
(+)
|
|
14:00 - 14:20 |
› Development of a virtual DIC approach to improve measurement accuracy and assess experimental setups - O. Tyley, University of Bristol [Bristol] |
|
|
14:20 - 14:40 |
› Image-based data pipeline for fusion engineering qualification and model validation - Adel Tayeb, UKAEA |
|
|
14:40 - 15:00 |
› Practical assessment of DIC uncertainties in view of FE model validation - Fabrice Pierron, MatchID NV |
|
|
15:00 - 15:20 |
› FE validation from DIC data: a practical case study in bending - Vahid Firouzbakht, MatchID NV |
|
|
15:20 - 15:40 |
› Vibration Measurements: Effect of Varying Exposure Time on Digital Image Correlation - Hubert Schreier, Correlated Solutions Inc. |
|
|
14:00 - 15:40
|
Thermography (110) - Xavier Balandraud |
(+)
|
|
14:00 - 14:20 |
› An efficient approach for identifying the coefficients of thermal expansion of CFRPs - Janice Dulieu-Barton, Bristol Composites Institute, School of Aerospace, and Mechanical Engineering, University of Bristol |
|
|
14:20 - 14:40 |
› Study of Non-Adiabatic Thermoelastic Effect in Face-sheet/Core Debonded Composite Sandwich Structures by Means of Full Field Imaging - Emily H. L. Leung, Bristol Composites Institute, School of Aerospace, and Mechanical Engineering, University of Bristol |
|
|
14:40 - 15:00 |
› Characterization of deformation behavior in metallic alloys using high-temperature digital image correlation analysis - Seung-Yong Lee, Materials Characterization Center, Korea Institute of Materials Science |
|
|
15:00 - 15:20 |
› Thermal investigations of supercritical CO2 jet impingement and jet structure influence on its cooling ability - Maha El nahas, Institut Clément Ader |
|
|
15:20 - 15:40 |
› Multi-physic calibration for coupled IR Thermography - Stereo DIC sensor: from target to software - Théo SENTAGNE, DGA Techniques aérospatiales, Institut Clément Ader |
|
|
14:00 - 15:40
|
Minisymposium: Math & Algorithms (223) - Julien Réthoré |
(+)
|
|
14:00 - 14:20 |
› High-Performance Mechanically Regularized Finite-Element Digital Volume Correlation for Complex Architectured Materials - Lucas Person, Ecole Normale Supérieure Paris-Saclay, Institut Clément Ader, Institut de Mathématiques de Toulouse UMR5219 |
|
|
14:20 - 14:40 |
› Beyond Nyquist Theorem: Reconstruction algorithms of down-sampled signals for vision-based vibration measurements - Davide Mastrodicasa, Siemens Industry Software NV, Vrije Universiteit [Brussel] |
|
|
14:40 - 15:00 |
› IBIS : Imaging bifurcations in 2D periodic metamaterials - Fabien Amiot, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) |
|
|
15:00 - 15:20 |
› The impact of metrics in mechanical imaging - Jean-François Witz, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013 |
|
|
15:20 - 15:40 |
› Isogeometric surface fitting from tomographic images - Dorian BICHET, Institut de Mathématiques de Toulouse UMR5219, Institut Clément Ader |
|
|
15:40 - 16:10
|
Coffee break (Second floor) |
|
|
16:10 - 17:10
|
AI (223) - Jean-François Witz |
(+)
|
|
16:10 - 16:30 |
› A pseudo-DIC algorithm based on Convolutional Neural Networks - Marco Rossi, Università Politecnica delle Marche [Ancona] |
|
|
16:30 - 16:50 |
› Training an AI hyperelastic constitutive model with experimental data - Clément Jailin, LMPS - Laboratoire de Mécanique Paris-Saclay, 91190, Gif-sur-Yvette, France |
|
|
16:10 - 17:10
|
Uncertainty quantification (109) - Markus Klein |
(+)
|
|
16:10 - 16:30 |
› A Verification Method for Stereo-DIC for Use in the Forming Limit Standard Test Method - Mark Iadicola, National Institute of Standards and Technology |
|
|
16:30 - 16:50 |
› Tradeoffs in Lighting when applying Digital Image Correlation to Vibration-based Fatigue Testing - Ryan Berke, Utah State University |
|
|
16:50 - 17:10 |
› Improvement of Measurement Uncertainty Using Multi-camera DIC system and Its Benefits in Actual Applications - LiKang Luan, Dantec Dynamics GmbH |
|
|
16:10 - 17:10
|
Minisymposium: Patterning (110) - Linamaria Gallegos Mayorga |
(+)
|
|
16:10 - 16:30 |
› Fourier Synthesis of Patterns Optimized for DIC - Sven Bossuyt, School of Engineering [Aalto] |
|
|
16:30 - 16:50 |
› DIC monitoring of a half-scale masonry building subjected to cyclic quasi-static loading - Nathanaël Savalle, Institut national polytechnique Clermont Auvergne |
|
|
16:50 - 17:10 |
› 3D Deformation measurement on a rifle using Multi-Camera High-Speed DIC - Thorsten Siebert, LaVision (GERMANY) |
|
|
17:20 - 17:50
|
Closure (A0002) |
|
|
Loading...