PhotoMechanics - International DIC Society 2024 Conference

8:30 - 10:10 (1h40)

Small scale

A0002

João Quinta da Fonseca

› Automated, quantitative identification of slip system, twinning & boundary sliding activity maps from EBSD-SEM-DIC data - Johan Hoefnagels, Eindhoven University of Technology 08:30-08:50 (20min)

› High resolution 3D stereo DIC for small FOV using the Scheimpflug principle - Hendrik Pulju, isi-sys GmbH 08:50-09:10 (20min)

› Study of strain localization and crystal reorientation at the early stage of plastic deformation using LSCM, HR-EBSD and DCT-6D - Damien TEXIER, Institut Clément Ader 09:10-09:30 (20min)

› Elevated temperature High Resolution Digital Image Correlation in a Scanning Electron Microscope - Allan Harte, UK Atomic Energy Authority 09:30-09:50 (20min)

› Micro-computed topography from SEM backscattered electron multidetector images - Stéphane Roux, Laboratoire de Mécanique Paris-Saclay (LMPS) 09:50-10:10 (20min)

10:10 - 11:40 (1h30)

Poster

A103

› Identification of heterogeneous elastic limits inpolycrystalline 316L austenitic stainless steelduring tensile loading - Qi HU, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013 10:10-11:40 (1h30)

› Enhanced mechanical characterization of AP-HTPB-based soft propellants using DIC - David Kumar, Department of Aerospace Engineering, Indian Institute of Technology Madras 10:10-11:40 (1h30)

› High Throughput Tensile Testing for Characterization of Static Strain Aging - Ville Björklund, Aalto University School of Engineering, Department of Mechanical Engineering, PO Box 14200, FI-00076 Aalto, Finland 10:10-11:40 (1h30)

› Using full-fields measurements to determine the influence of crack velocity and non-singular terms on KIC of an epoxy resin - Bastien Lammens, DMAS, ONERA, F-59014 Lille, France 10:10-11:40 (1h30)

› Measuring the displacement of masonry stones by motion capture - Julien Archez, Laboratoire Navier 10:10-11:40 (1h30)

› Multiview DIC applied to the quantification of damage initiation and growth - 10:10-11:40 (1h30)

› Residual stress measurement in tire cables by FIB hole drilling - Raphaël Engel, Laboratoire de Mécanique Paris-Saclay 10:10-11:40 (1h30)

10:10 - 11:40 (1h30)

Poster

102

› Statistical study of intermittent calorific phenomena associated to the Portevin-Le Chatelier effect in an aluminum alloy - Antoine JURY, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal 10:10-11:40 (1h30)

› Simultaneous thermal and kinematic full-field measurements on optimal patterns based on thermography and spectral analysis - Thomas Jailin, Université Clermont Auvergne, CNRS, Clermont Auvergne INP, Institut Pascal, BP 10448, 63000 10:10-11:40 (1h30)

› Quantifying thermo-elastic cooling and heating during tensile strength testing of solid engineering alloys with a highly sensitive cooled infrared camera - STEPHANE BOUBANGA TOMBET, Telops 10:10-11:40 (1h30)

› Michelin's Talk for PM-iDICs 2024 abstracts - UMRANI Florian, Michelin - Sophie Charpin, Michelin 10:10-11:40 (1h30)

› Overview of Digital Image Correlation in Aerospace Engineering in India - Abhishek Gurudutt, Pyrodynamics 10:10-11:40 (1h30)

10:10 - 11:40 (1h30)

Poster

104

› Identifying forces in 2D granular materials using the Virtual Fields Method from strains measured by Localized Spectrum Analysis - Kunanon Jongchansitto, Chiang Mai University 10:10-11:40 (1h30)

› Characterization of the effect of roughness on dynamic ruptures along frictional interfaces - Saba Robinary, NANTES UNIVERSITÉ - École Centrale de Nantes 10:10-11:40 (1h30)

› Digital Image Correlation Study of Surface Defects on Plastic Bonded Explosives - John Graham, Lawrence Livermore National Laboratory 10:10-11:40 (1h30)

› Analyses of grain-scale strain heterogeneities to provide input for polycrystalline models - Jean-Patrick Goulmy, Mechanics surfaces and materials processing (MSMP) 10:10-11:40 (1h30)

› Microstructural study of additively manufactured ALF357 alloy: Effect of tensile loading and build orientations - Avinash Mohan, Indian Institute of Technology Madras 10:10-11:40 (1h30)

› Strain signature of solid-solid phase transitions within a diamond anvil cell - Nicolas Bruzy, CEA DAM Bruyères le Châtel 10:10-11:40 (1h30)

› Understanding Anisotropy of Carbon-reinforced PEEK Using Stereo DIC - Vipin Gupta, Birla Institute of Technology and Science 10:10-11:40 (1h30)

10:10 - 11:40 (1h30)

Poster

108

› An imaging technique for the strain-engineering of deformable electrodes - Fabien Amiot, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) 10:10-11:40 (1h30)

› Developing a new optical strain gage for full-field measurements - Adrien Vinel, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal 10:10-11:40 (1h30)

› Development of a flexible and advanced digital image correlation program - David Kumar, Department of Aerospace Engineering, Indian Institute of Technology Madras 10:10-11:40 (1h30)

› Real-time measurement of surface strain for understanding creep behavior in bending polymer films - JIAYI YU, Department of Chemical Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology [Tokyo], Laboratory for Chemistry and Life Science, Institute of Innovative Research, Tokyo Institute of Technology [Tokyo] 10:10-11:40 (1h30)

› Elimination of Interpolation Error in Digital Volume Correlation - Samuel Wantz, Institut Pprime, CEntre Technique des Industries Mécaniques 10:10-11:40 (1h30)

› DIC data filtering proposal for complex environments - Gweni Alonso Aruffo, IMT Mines Albi, Centre ICA-A, Albi - Rébecca Bonnaire, IMT Mines Albi, Centre ICA-A, Albi 10:10-11:40 (1h30)

› Evaluation of Influences on Results of Digital Image Correlation by Window of Constant Temperature Bath - Ayano Seki, Aoyama Gakuin University 10:10-11:40 (1h30)

11:40 - 12:30 (50min)

Keynote

A0002

Brian Bay & Phil Reu

› From random speckles to checkerboard patterns - Michel Grédiac, Université Clermont Auvergne 11:40-12:30 (50min)

12:30 - 14:00 (1h30)

Lunch

Last floor

13:15 - 13:55 (40min)

iDICs meeting

109

14:00 - 15:40 (1h40)

Materials

109

Michel Coret

› Understanding the behaviour of a Cu-CuAl functionally-graded alloy using DIC - Filipa Cunha, Faculdade de Ciências e Tecnologia = School of Science & Technology 14:00-14:20 (20min)

› Localized Deformation and Band Formation in Superelastic Nitinol Wires - Dinc Erdeniz, University of Cincinnati 14:20-14:40 (20min)

› Strength characterisation of Nicrofer–Stellite joint using Digital Image Correlation - N. Iniyan Thiruselvam, BITS Pilani K. K. Birla Goa campus, Goa 403726 14:40-15:00 (20min)

› Experimental Quantification of Ultraslow Slip Rate of Shear Interfaces Using Digital Image Correlation - Vito Rubino, NANTES UNIVERSITÉ - École Centrale de Nantes 15:00-15:20 (20min)

14:00 - 15:40 (1h40)

Aerospace

110

Phil Reu

› Building simulation models credibility: the role of DIC in a complex structural testing environment - Pierre Baudoin, EikoSim 14:00-14:20 (20min)

› DIC data integration to achieve multi-measurement system on full-scale wing tests - Emily Rolfe, AIRBUS Operations Ltd. 14:20-14:40 (20min)

› Full Field Imaging and Data Fusion for Substructural Testing - Riccardo Cappello, University of Bristol 14:40-15:00 (20min)

› Using DIC for Full-Field Measurement of Long Slender Structures - Matlock Mennu, NASA Langley Research Center [Hampton] 15:00-15:20 (20min)

14:00 - 15:20 (1h20)

Thermography

223

Janice Barton

› Investigation of the dissipative mechanisms in 3D layer-to-layer woven composite under cyclic loading - Vincent Le Saux, Institut de Recherche Dupuy de Lôme (IRDL) 14:00-14:20 (20min)

› Investigating heterogeneous strain-induced crystallization in natural rubber with infrared thermography based micro-surface calorimetry - Jean-Benoît LE CAM, Institut de Physique, Université de Rennes 1 14:20-14:40 (20min)

› Infrared Thermography Applied to In-Situ Crack Growth Assessment - Lorenzo Bercelli, Institut de Recherche Dupuy de Lôme 14:40-15:00 (20min)

› Evaluation of Conduction Thermography for Surface Crack Detection in Titanium Specimens: Preliminary Offline Tests and Initial Online Monitoring During Fatigue Tests - Rosa De Finis, Università del Salento 15:00-15:20 (20min)

16:00 - 22:30 (6h30)

Social event

In front of the building

18:10 - 19:00 (50min)

Keynote

Johan Hoefnagels

› Coming soon - João Quinta da Fonseca, University of Manchester [Manchester] 18:10-19:00 (50min)

Planning - subjected to minor changes