Planning

Week Tue. 29 Wed. 30 Thu. 31 List

	Tue. 29	Wed. 30	Thu. 31
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00	Welcome 8:00 - 9:00 (1h) Welcome Opening speech 9:00 - 9:30 (30min) Opening speech A0002 Keynote 9:30 - 10:20 (50min) Keynote A0002 Benoit Blaysat › Chasing anticracks - How PTV and DIC revolutionized snow avalanche research - Alec Van Herwijnen, WSL Institute for Snow and Avalanche Research SLF 09:30-10:20 (50min) Coffee break 10:20 - 10:50 (30min) Coffee break Second floor Extrem 10:50 - 11:50 (1h) Extrem A0002 Marco Rossi › X-ray digital image correlation for deformation measurements in extreme environments - Elizabeth Jones, Sandia National Laboratories 10:50-11:20 (30min) › Deformation of CANDU Pressure Tube under Biaxial Stress State at High Temperatures - Chukwudi Azih, Canadian Nuclear Laboratories 11:10-11:30 (20min) › A SHPB digital twin for the optimization of specimens dedicated to heterogeneous high strain rate tests - Thomas Fourest, DMAS, ONERA, 59000, Lille, France 11:30-11:50 (20min) Vendors 11:50 - 12:30 (40min) Vendors A0002 Lunch 12:30 - 13:50 (1h20) Lunch Last floor Volume measurements Inverse and identification methods DIC 13:50 - 15:30 (1h40) Volume measurements 109 Clément Jailin › Universal Tomographic Calibration: Achieving 1/100th Voxel Digital Volume Correlation (DVC) Displacement Precision - Alex Arzoumanidis, Psylotech, Inc. - Brian Bay, Oregon State University; School of Mechanical, Industrial, and Manufacturing Engineering - André Phillion, McMaster University [Hamilton, Ontario] 13:50-14:10 (20min) › Dual X-ray and Neutron tomography to observe hydro-mechanics in porous media - Hilario Greggi, 3SR Lab 14:10-14:30 (20min) › Optical Scanning Tomography to measure harmonic displacement fields and to identify visco-elastic parameters distributions - Bertrand Wattrisse, Laboratoire de Mécanique et Génie Civil 14:30-14:50 (20min) › Towards color X-ray tomography: Detection of small quartz grains via contrast-enhanced 3D images of carbonate rocks using a CdTe Photon Counting Detector - Franck Decroos, Laboratoire Navier 14:50-15:10 (20min) › Measuring residual stresses in 3D woven composite fan blades via DVC - Yannick YASOTHAN, Laboratoire de Mécanique Paris-Saclay 15:10-15:30 (20min) 13:50 - 15:30 (1h40) Inverse and identification methods 110 Fabrice Pierron › Boundary conditions and constitutive parameter identification - Antoine Vintache, EikoSim, Laboratoire de Mécanique Paris-Saclay 13:50-14:10 (20min) › Characterization of anisotropic hyperelastic behavior with a data-driven approach - Annie Morch, Institut de Recherche en Génie Civil et Mécanique Nantes université 14:10-14:30 (20min) › Image-based B-Spline beam models of architected materials using Virtual Image Correlation with variable cross-section - Jean-Charles Passieux, Institut Clément Ader 14:30-14:50 (20min) › Material testing 2.0 for viscoelasticity : characteristic time sensitivity vs experiment duration - Margot Leclercq, Université Paris Saclay, ENS Paris-Saclay, CentraleSupélec, CNRS, LMPS, 91190, Gif-sur-Yvette, France 14:50-15:10 (20min) › Optimising test sequences for robust material identification using a data assimilation approach - Marie Guerder, Institut Clément Ader 15:10-15:30 (20min) 13:50 - 15:30 (1h40) DIC 223 Iniyan Thiruselvam N. › Deformation Behavior Analysis of Honeycomb Structure Under In-plane Compression Using Global DIC - Yamaguchi Yuki, Aoyama Gakuin University 13:50-14:10 (20min) › Full-Field Mechanical Deformation Behaviour of Different Metallic Laser Welded Joints under Tensile Loadings - Patricio Carrion, Sandia National Laboratories [Albuquerque] 14:10-14:30 (20min) › DIC for Detection of Embedded Structures - Izabela Nowakowska, Heriot-Watt University 14:30-14:50 (20min) › Application of digital image correlation in the characterization of metal powder spreadability for additive manufacturing - Lukas Daut, Oregon State University; School of Mechanical, Industrial, and Manufacturing Engineering 14:50-15:10 (20min) › Development of a digital image correlation system for in-situ epoxy cure shrinkage, thermal expansion, and wafer warpage measurements - Alexander Landauer, National Institute of Standards and Technology 15:10-15:30 (20min) Coffee break 15:30 - 16:00 (30min) Coffee break Second floor Volume measurements Inverse and identification methods Softwares 16:00 - 17:20 (1h20) Volume measurements 109 Brian Bay › Using DVC to measure manufacturing differences in 3D woven composite parts - Arturo Mendoza, Safran Tech, Laboratoire de Mécanique Paris-Saclay 16:00-16:20 (20min) › Debonding quantification via Digital Volume Correlation. Application to a mortar reinforcement pull-out. - Sylvain Langlois, Laboratoire de Mécanique Paris-Saclay 16:20-16:40 (20min) › Projection enhanced DVC to analyze relaxation and crack propagation until failure on architectured aluminum alloy - Viktor Kosin, Ecole Normale Supérieure Paris-Saclay, Leibniz University Hannover 16:40-17:00 (20min) › 3D virtual image correlation (3D-VIC) for lattice structures metrology using x-ray radiographs - Julien Réthoré, Nantes Université, Ecole Centrale Nantes, CNRS, GeM, UMR 6183, 1 rue de la Noë, France 17:00-17:20 (20min) 16:00 - 17:20 (1h20) Inverse and identification methods 110 Elizabeth Jones › Constitutive model validity evaluation for MT 2.0 applications - Amar Peshave, MatchID NV 16:00-16:20 (20min) › Identification of heterogeneous elastic parameters with the Equilibrium Gap Method - Rémi Haustrate, LMPS - Laboratoire de Mécanique Paris-Saclay, 91190, Gif-sur-Yvette, France. 16:20-16:40 (20min) › Spatial mapping of plastic properties in welds with the VFM - Robert Hamill, University of Southampton 16:40-17:00 (20min) › A crystal plasticity-based intragranular stress fields identification framework: application to commercially pure aluminium - Raphaël Langlois, Nantes Université, Ecole Centrale Nantes, CNRS, GeM, UMR 6183, 1 rue de la Noë, F-44321 Nantes, France 17:00-17:20 (20min) 16:00 - 17:20 (1h20) Softwares 223 Mark Iadicola › The Stereo-DIC Challenge 2.0: DIC Strain Comparisons Using Common Images - Phillip Reu, Sandia National Laboratories [Albuquerque] 16:00-16:20 (20min) › R3XA: Toward a metadata standard for experimental (photo)mechanics datasets - Jean-Charles Passieux, Institut Clément Ader 16:20-16:40 (20min) › iDVC - Open-Source Interactive Software for Digital Volume Correlation - Danica Sugic, STFC Rutherford Appleton Laboratory 16:40-17:00 (20min) › uCheckMate : An open-source python library for research and development of Finite element stereo digital image correlation - Houssein MATAR, Institut Pascal 17:00-17:20 (20min) City tour 18:00 - 19:00 (1h) City tour Visiting Clermont-Ferrand old downtown Townhall's cocktail 19:00 - 21:00 (2h) Townhall's cocktail	Small scale 8:30 - 10:10 (1h40) Small scale A0002 João Quinta da Fonseca › Automated, quantitative identification of slip system, twinning & boundary sliding activity maps from EBSD-SEM-DIC data - Johan Hoefnagels, Eindhoven University of Technology 08:30-08:50 (20min) › High resolution 3D stereo DIC for small FOV using the Scheimpflug principle - Hendrik Pulju, isi-sys GmbH 08:50-09:10 (20min) › Study of strain localization and crystal reorientation at the early stage of plastic deformation using LSCM, HR-EBSD and DCT-6D - Damien TEXIER, Institut Clément Ader 09:10-09:30 (20min) › Elevated temperature High Resolution Digital Image Correlation in a Scanning Electron Microscope - Allan Harte, UK Atomic Energy Authority 09:30-09:50 (20min) › Micro-computed topography from SEM backscattered electron multidetector images - Stéphane Roux, Laboratoire de Mécanique Paris-Saclay (LMPS) 09:50-10:10 (20min) Poster Poster Poster Poster 10:10 - 11:40 (1h30) Poster A103 › Identification of heterogeneous elastic limits inpolycrystalline 316L austenitic stainless steelduring tensile loading - Qi HU, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013 10:10-11:40 (1h30) › High Throughput Tensile Testing for Characterization of Static Strain Aging - Ville Björklund, Aalto University School of Engineering, Department of Mechanical Engineering, PO Box 14200, FI-00076 Aalto, Finland 10:10-11:40 (1h30) › Using full-fields measurements to determine the influence of crack velocity and non-singular terms on KIC of an epoxy resin - Bastien Lammens, DMAS, ONERA, F-59014 Lille, France 10:10-11:40 (1h30) › Measuring the displacement of masonry stones by motion capture - Julien Archez, Laboratoire Navier 10:10-11:40 (1h30) › Residual stress measurement in tire cables by FIB hole drilling - Raphaël Engel, Laboratoire de Mécanique Paris-Saclay 10:10-11:40 (1h30) › Real-time measurement of surface strain for understanding creep behavior in bending polymer films - JIAYI YU, Department of Chemical Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology [Tokyo], Laboratory for Chemistry and Life Science, Institute of Innovative Research, Tokyo Institute of Technology [Tokyo] 10:10-11:40 (1h30) 10:10 - 11:40 (1h30) Poster 102 › Statistical study of intermittent calorific phenomena associated to the Portevin-Le Chatelier effect in an aluminum alloy - Antoine JURY, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal 10:10-11:40 (1h30) › Simultaneous thermal and kinematic full-field measurements on optimal patterns based on thermography and spectral analysis - Thomas Jailin, Université Clermont Auvergne, CNRS, Clermont Auvergne INP, Institut Pascal, BP 10448, 63000 10:10-11:40 (1h30) › Quantifying thermo-elastic cooling and heating during tensile strength testing of solid engineering alloys with a highly sensitive cooled infrared camera - STEPHANE BOUBANGA TOMBET, Telops 10:10-11:40 (1h30) › Michelin's Talk for PM-iDICs 2024 abstracts - UMRANI Florian, Michelin - Sophie Charpin, Michelin 10:10-11:40 (1h30) › Overview of Digital Image Correlation in Aerospace Engineering in India - Abhishek Gurudutt, Pyrodynamics 10:10-11:40 (1h30) 10:10 - 11:40 (1h30) Poster 104 › Identifying forces in 2D granular materials using the Virtual Fields Method from strains measured by Localized Spectrum Analysis - Kunanon Jongchansitto, Chiang Mai University 10:10-11:40 (1h30) › Characterization of the effect of roughness on dynamic ruptures along frictional interfaces - Saba Robinary, NANTES UNIVERSITÉ - École Centrale de Nantes 10:10-11:40 (1h30) › Digital Image Correlation Study of Surface Defects on Plastic Bonded Explosives - John Graham, Lawrence Livermore National Laboratory 10:10-11:40 (1h30) › Analyses of grain-scale strain heterogeneities to provide input for polycrystalline models - Jean-Patrick Goulmy, Mechanics surfaces and materials processing (MSMP) 10:10-11:40 (1h30) › Microstructural study of additively manufactured ALF357 alloy: Effect of tensile loading and build orientations - Avinash Mohan, Indian Institute of Technology Madras 10:10-11:40 (1h30) › Strain signature of solid-solid phase transitions within a diamond anvil cell - Nicolas Bruzy, CEA DAM Bruyères le Châtel 10:10-11:40 (1h30) › Understanding Anisotropy of Carbon-reinforced PEEK Using Stereo DIC - Vipin Gupta, Birla Institute of Technology and Science 10:10-11:40 (1h30) 10:10 - 11:40 (1h30) Poster 108 › An imaging technique for the strain-engineering of deformable electrodes - Fabien Amiot, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) 10:10-11:40 (1h30) › Developing a new optical strain gage for full-field measurements - Adrien Vinel, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal 10:10-11:40 (1h30) › Elimination of Interpolation Error in Digital Volume Correlation - Samuel Wantz, Institut Pprime, CEntre Technique des Industries Mécaniques 10:10-11:40 (1h30) › DIC data filtering proposal for complex environments - Gweni Alonso Aruffo, IMT Mines Albi, Centre ICA-A, Albi - Rébecca Bonnaire, IMT Mines Albi, Centre ICA-A, Albi 10:10-11:40 (1h30) › Evaluation of Influences on Results of Digital Image Correlation by Window of Constant Temperature Bath - Ayano Seki, Aoyama Gakuin University 10:10-11:40 (1h30) Keynote 11:40 - 12:30 (50min) Keynote A0002 Brian Bay & Phil Reu › From random speckles to checkerboard patterns - Michel Grédiac, Université Clermont Auvergne 11:40-12:30 (50min) Lunch iDICs meeting - DIC Challenge 12:30 - 14:00 (1h30) Lunch Last floor 13:15 - 13:55 (40min) iDICs meeting - DIC Challenge 109 Benoît Blaysat Materials Aerospace Thermography 14:00 - 15:40 (1h40) Materials 109 Michel Coret › Understanding the behaviour of a Cu-CuAl functionally-graded alloy using DIC - Filipa Cunha, Faculdade de Ciências e Tecnologia = School of Science & Technology 14:00-14:20 (20min) › Localized Deformation and Band Formation in Superelastic Nitinol Wires - Dinc Erdeniz, University of Cincinnati 14:20-14:40 (20min) › Strength characterisation of Nicrofer–Stellite joint using Digital Image Correlation - N. Iniyan Thiruselvam, BITS Pilani K. K. Birla Goa campus, Goa 403726 14:40-15:00 (20min) › Experimental Quantification of Ultraslow Slip Rate of Shear Interfaces Using Digital Image Correlation - Vito Rubino, NANTES UNIVERSITÉ - École Centrale de Nantes 15:00-15:20 (20min) 14:00 - 15:40 (1h40) Aerospace 110 Phil Reu › Building simulation models credibility: the role of DIC in a complex structural testing environment - Pierre Baudoin, EikoSim 14:00-14:20 (20min) › DIC data integration to achieve multi-measurement system on full-scale wing tests - Emily Rolfe, AIRBUS Operations Ltd. 14:20-14:40 (20min) › Full Field Imaging and Data Fusion for Substructural Testing - Riccardo Cappello, University of Bristol 14:40-15:00 (20min) › Using DIC for Full-Field Measurement of Long Slender Structures - Matlock Mennu, NASA Langley Research Center [Hampton] 15:00-15:20 (20min) 14:00 - 15:20 (1h20) Thermography 223 Janice Barton › Investigation of the dissipative mechanisms in 3D layer-to-layer woven composite under cyclic loading - Vincent Le Saux, Institut de Recherche Dupuy de Lôme (IRDL) 14:00-14:20 (20min) › Investigating heterogeneous strain-induced crystallization in natural rubber with infrared thermography based micro-surface calorimetry - Jean-Benoît LE CAM, Institut de Physique, Université de Rennes 1 14:20-14:40 (20min) › Infrared Thermography Applied to In-Situ Crack Growth Assessment - Lorenzo Bercelli, Institut de Recherche Dupuy de Lôme 14:40-15:00 (20min) › Evaluation of Conduction Thermography for Surface Crack Detection in Titanium Specimens: Preliminary Offline Tests and Initial Online Monitoring During Fatigue Tests - Rosa De Finis, Università del Salento 15:00-15:20 (20min) Social event Keynote 16:00 - 22:30 (6h30) Social event In front of the building 18:10 - 19:00 (50min) Keynote Johan Hoefnagels › Measuring and modelling the elastoplastic transition in engineering alloys at the microstructural scale - João Quinta da Fonseca, University of Manchester [Manchester] 18:10-19:00 (50min)	Fracture 8:30 - 10:30 (2h) Fracture A0002 Jan Neggers › Automated crack detection in laminated composite materials from optical flow measurements - Matthieu Nicol, ONERA, DMAS, Université Paris-Saclay, 29 avenue de la Division Leclerc, 92320 Châtillon, France 08:30-08:50 (20min) › Stereocorrelation to analyze crack propagation until failure during a shaking table test - Amelie Fau, Laboratoire de Mécanique Paris-Saclay 08:50-09:10 (20min) › In-situ 2D-DIC as a crack growth analysis tool for high-cycle fatigue bending tests - linamaria Gallegos Mayorga, École Nationale Supérieure d'Arts et Métiers 09:10-09:30 (20min) › Enhanced snow fracture toughness estimates through digital image correlation analysis of the elastic behaviour of weak snowpack layers - Melin Walet, WSL Institute for Snow and Avalanche Research SLF, Davos Dorf 09:30-09:50 (20min) › Study of different DIC approaches to measure crack opening/closing levels in a biaxial crack growth trial with combined HCF/LCF loads - Andreas Blug, Fraunhofer Institute for Physical Measurement Techniques IPM 09:50-10:10 (20min) › A new methodology exploiting digital image correlation to detect crack initiation - Sylvia Feld-Payet, DMAS, ONERA, Université Paris Saclay [Châtillon] 10:10-10:30 (20min) Break 10:30 - 11:00 (30min) Break Second floor Keynote 11:00 - 11:50 (50min) Keynote A0002 Robin Bouclier › Preconditioned conjugate gradient solver for the linearized optical flow systems - Pierre Gosselet, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013 11:00-11:50 (50min) Minisymposium: Math & Algorithms 11:50 - 12:30 (40min) Minisymposium: Math & Algorithms A0002 Robin Bouclier › Large Motion Tracking Regularization with the Finite Strain Formulation of the Discrete Equilibrium Gap Principle - Martin Genet, Mathematical and Mechanical Modeling with Data Interaction in Simulations for Medicine 11:50-12:10 (20min) › A Procedure for Global Non-Local Digital Image Correlation (NL-DIC) - Tushar Bhandari, Indian Institute of Technology Kharagpur 12:10-12:30 (20min) Lunch iDICs meeting - Standardization Committee 12:30 - 14:00 (1h30) Lunch Last floor 13:15 - 13:55 (40min) iDICs meeting - Standardization Committee 109 Mark Iadicola Uncertainty quantification Thermography Minisymposium: Math & Algorithms 14:00 - 15:40 (1h40) Uncertainty quantification 109 Thorsten Siebert › Development of a virtual DIC approach to improve measurement accuracy and assess experimental setups - O. Tyley, University of Bristol [Bristol] 14:00-14:20 (20min) › Image-based data pipeline for fusion engineering qualification and model validation - Adel Tayeb, UKAEA 14:20-14:40 (20min) › Practical assessment of DIC uncertainties in view of FE model validation - Fabrice Pierron, MatchID NV 14:40-15:00 (20min) › FE validation from DIC data: a practical case study in bending - Vahid Firouzbakht, MatchID NV 15:00-15:20 (20min) › Vibration Measurements: Effect of Varying Exposure Time on Digital Image Correlation - Hubert Schreier, Correlated Solutions Inc. 15:20-15:40 (20min) 14:00 - 15:40 (1h40) Thermography 110 Xavier Balandraud › An efficient approach for identifying the coefficients of thermal expansion of CFRPs - Janice Dulieu-Barton, Bristol Composites Institute, School of Aerospace, and Mechanical Engineering, University of Bristol 14:00-14:20 (20min) › Study of Non-Adiabatic Thermoelastic Effect in Face-sheet/Core Debonded Composite Sandwich Structures by Means of Full Field Imaging - Emily H. L. Leung, Bristol Composites Institute, School of Aerospace, and Mechanical Engineering, University of Bristol 14:20-14:40 (20min) › Characterization of deformation behavior in metallic alloys using high-temperature digital image correlation analysis - Seung-Yong Lee, Materials Characterization Center, Korea Institute of Materials Science 14:40-15:00 (20min) › Thermal investigations of supercritical CO2 jet impingement and jet structure influence on its cooling ability - Maha El nahas, Institut Clément Ader 15:00-15:20 (20min) › Multi-physic calibration for coupled IR Thermography - Stereo DIC sensor: from target to software - Théo SENTAGNE, DGA Techniques aérospatiales, Institut Clément Ader 15:20-15:40 (20min) 14:00 - 15:40 (1h40) Minisymposium: Math & Algorithms 223 Julien Réthoré › High-Performance Mechanically Regularized Finite-Element Digital Volume Correlation for Complex Architectured Materials - Lucas Person, Ecole Normale Supérieure Paris-Saclay, Institut Clément Ader, Institut de Mathématiques de Toulouse UMR5219 14:00-14:20 (20min) › Beyond Nyquist Theorem: Reconstruction algorithms of down-sampled signals for vision-based vibration measurements - Davide Mastrodicasa, Siemens Industry Software NV, Vrije Universiteit [Brussel] 14:20-14:40 (20min) › IBIS : Imaging bifurcations in 2D periodic metamaterials - Fabien Amiot, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) 14:40-15:00 (20min) › The impact of metrics in mechanical imaging - Jean-François Witz, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013 15:00-15:20 (20min) › Isogeometric surface fitting from tomographic images - Dorian BICHET, Institut de Mathématiques de Toulouse UMR5219, Institut Clément Ader 15:20-15:40 (20min) Coffee break 15:40 - 16:10 (30min) Coffee break Second floor AI Uncertainty quantification Minisymposium: Patterning 16:10 - 17:10 (1h) AI 223 Jean-François Witz › A pseudo-DIC algorithm based on Convolutional Neural Networks - Marco Rossi, Università Politecnica delle Marche [Ancona] 16:10-16:30 (20min) › Training an AI hyperelastic constitutive model with experimental data - Clément Jailin, LMPS - Laboratoire de Mécanique Paris-Saclay, 91190, Gif-sur-Yvette, France 16:30-16:50 (20min) 16:10 - 17:10 (1h) Uncertainty quantification 109 Markus Klein › A Verification Method for Stereo-DIC for Use in the Forming Limit Standard Test Method - Mark Iadicola, National Institute of Standards and Technology 16:10-16:30 (20min) › Tradeoffs in Lighting when applying Digital Image Correlation to Vibration-based Fatigue Testing - Ryan Berke, Utah State University 16:30-16:50 (20min) › Improvement of Measurement Uncertainty Using Multi-camera DIC system and Its Benefits in Actual Applications - LiKang Luan, Dantec Dynamics GmbH 16:50-17:10 (20min) 16:10 - 17:10 (1h) Minisymposium: Patterning 110 Linamaria Gallegos Mayorga › Fourier Synthesis of Patterns Optimized for DIC - Sven Bossuyt, School of Engineering [Aalto] 16:10-16:30 (20min) › DIC monitoring of a half-scale masonry building subjected to cyclic quasi-static loading - Nathanaël Savalle, Institut national polytechnique Clermont Auvergne 16:30-16:50 (20min) › 3D Deformation measurement on a rifle using Multi-Camera High-Speed DIC - Thorsten Siebert, LaVision (GERMANY) 16:50-17:10 (20min) Closure 17:20 - 17:50 (30min) Closure A0002

Online user: 1

Privacy